* All prices are orientative and may vary depending on distributors, countries, and market conditions.





Benefit from this highly reliable test cell for studying solid-state-batteries, compatible with CompreDrive and CompreFrame:
Typical applications
The CompreCell DP is the ideal solution for the layer-by-layer assembly of solid-state batteries and allows for studying them in a 2- or 3-electrode configuration at different stack pressures and temperatures:
Price: On request
| Applications | Solid-state battery, Solid electrolyte |
| Storage conditions | Storage +10 to +40 °C, Drying up to +100 °C, RH 0–80% (non-condensing), Non-corrosive atmosphere, Storage +10 to +40 °C |
| Dimensions | 6cm x 6 cm x 13.4 cm |
| Weight | ~1.3 kg |
| Max Battery Thickness | 10 mm |
| Piston diameter | 6 mm, 12 mm, 10 mm |
Your request will be sent to rhd instruments via email.
| Piston material | Hard metal (90% WC / 10% Co) |
| Max. Applied voltage | 40 V (AC/DC) |
| O-ring material | FFKM |
| Max. Pressure | 1.7 GPa (6 mm diam. piston), 955 MPa (10 mm diam. piston), 663 MPa (12 mm diam. piston) |
| Sleeve material | PEI, PEEK, Al₂O₃ |
| Airthight | Helium-leakage tested |
| Electrode configuration | 2-electrode, 3-electrode |
| Compression architecture | Dual piston, can opened from both sides |
| Product type (battery) | Solid-electrolyte test cell, Solid-state battery test cell |
| Operating Temperature | -40 °C up to +250 °C, Tmax depends on selected sleeve material |
| Max. Applicable force | 50 kN (6 mm diam. piston), 75 kN (10 mm and 12 mm diam. piston) |