Search products

• Voltage ± 10V max
• Current ± 5A max
• Frequency range 10 µHz to 10 MHz

• PTFE Screw
• Titanium Holding Plate
• 6mm Dia
• Gold Coated Copper Rod

• Platinum mesh electrode
• 10 x 10 mm
• Body diameter: 6 mm
• Total length: 110mm

• 1–4 channel modules
• 100 mA & 20 mA ranges
• ±11 V compliance
• Measurement resolution: 0.01 mA

• Glass cell: 10ml
• Diameters 6.35mm, 6.35mm, 6mm
• Holes on the cap are fixed size.
• Fitting 6mm/6.35mm OD electrode.

• Small volumes
• 1 to 5 mL
• Inert gas purging possible

• Length: 120mm
• Higher Diameter: 12mm
• Lower Diameter: 8mm
• Electrolyte: 0.1 M KOH

• Disc 10mm
• Length: 98,5mm
• Higher diameter: 12mm
• Lower diameter: 10mm

• Cation-exchange membrane
• PEEK-reinforced structure
• High oxidative stability
• Low resistance membrane

• For alkaline electrolysis
• 17–25 µm membrane
• >100 MPa tensile

• CO2 zero-gap electrolysis
• Catalyst & membrane studies
• Selectable electrode setup

• 100 mL
• Devanathan cell

• Gold microelectrode 200 µm
• Length: 50 mm
• Internal Diameter: 200 µm
• External Diameter: 5 mm

• Educational and lab applications
• Fast & accurate results
• Single-junction
• Refillable

• High-Quality Glassy Carbon.

• Up to 20A with booster
• EIS up to 5 MHz
• 12 ranges with low current probe

• Hg/Hg2Cl2 - Sat. KCl
• Glass body
• 4.5 mm body dia.
• 0 °C to 50 °C

• All-platinum helicoidal electrode
• 30 mm large x 10 mm dia coil

Swagelok Cell (T shape) - 3 electrodes 316L SS Ø 12.7 mm

• Al working electrode
• Active area: 2 mm dia disk

• Pt wire purity: 99.95%
• Mesh Purity: Pt-Ir alloy (90.10% Pt)
• Shaft material: Borosilicate glass
• Standard ground joint 14/23

• Voltage ± 10V max
• Compliance Voltage ± 45V max
• Current ± 1A max
• Frequency Range 1μHz to 10MHz

• Gas-tight fitting
• 50 mL each compartiment
• Porous glass-frit separation
• Separator frit pore size 4-5 micron

• PTFE Screw
• Platinum Holding Plate
• 6mm Dia
• Gold Coated Copper Rod

• Two-electrode configuration
• 50 mL cell
• Max. sample diameter 45 mm
• Exposed sample area of 6 cm2

• Length: 120mm
• Higher Diameter: 12mm
• Lower Diameter: 8mm
• Electrolyte: Saturated KCl

• 5x5 mm
• Length: 103mm
• Higher diameter: 12mm
• Lower diameter: 8mm

• For flat 25×25 mm samples
• Controlled active area
• Low-resistance contact
• PEEK chemical resistance

• Straight wire counter
• 0.6 mm wire diameter
• 130 mm active length
• Pt or Au wire options

• Anion exchange membrane
• Selective anion transport

• Screw mount, single-sided
• Single compartment, PEEK body

• FTO glass 25x25x1.1 mm
• Resistivity 7-15 ohm/sq

• High-purity Cu thin film
• nm to µm thickness
• Custom substrate options
• Research grade

• PK-reinforced
• For alkaline electrolysis
• Up to 100 °C

• PEM electrolysis test cell
• Catalyst & membrane studies
• Porous transport studies

• Platinum microelectrode 10 µm
• Length: 50 mm
• Internal Diameter: 10 µm
• External Diameter: 5 mm