Our Brands
Browse our selection of trusted brands
Redoxme
Norrköping (Sweden)
About Redoxme
Redoxme AB was founded in July 2015 in Sweden. It is an outcome of an entrepreneurial process based on exploitation of an academic technology at Linköping University.
The Headquarter and Research & Development Department are located in Norrköping, Sweden. The company has one foreign branch Assembly & Distribution, located in AGH Center of Energy, Cracow, Poland.
We provide laboratory instrumentation that enables simultaneous in-situ measurements of a number of signals (electrochemical, optical, thermal and other) on thin film and membrane materials. So what we are actually doing is creating an added value for existing laboratory facilities. An extension that combines many measurement techniques. But at the same time we promote best practice in measurements and data analysis and we impose a concrete standardization in the field of material science. In practice we are taking needs and opinions of scientist to create new methods that actually benefit to whole research community.
Our unique research/business environment consists of many actors from research and industry including Laboratory of Organic Electronics at Linköping University, RISE Acreo AB and PEA-Manufacturing.
Products by Redoxme
10 pcs of metal wire clip and PTFE plug with expanded PTFE septum
- Reliable electrode contact
- For films & membranes
- Includes PTFE septum plug
- Reusable metal clip
2-CEC 50 mL - Two-compartment Electrochemical Cell
AS Rack 100 mL - Adjustable Substrate Rack for 100 mL beaker
- Adjustable substrate holder
- Fits 100 mL beakers
AS Rack 150 mL - Adjustable Substrate Rack for 150 mL beaker
Adjustable substrate holder Fits 150 mL beakers Chemically resistant PTFE Holds up to 10 substrates
Redoxme
Price: On Request
AS Rack 250 mL - Adjustable Substrate Rack for 250 mL beaker
- Adjustable substrate holder
- Fits 250 mL beakers
- Chemically resistant PTFE
- Holds up to 12 substrates
Redoxme
Price: On Request
AS Rack 50 mL - Adjustable Substrate Rack for 50 mL beaker
- Adjustable substrate holder
- Fits 50 mL beakers
- Chemically resistant PTFE
- Holds up to 6 substrates
Redoxme
Price: On Request
Acrylonitrile multi-copolymer binder (LA133) - 25 mL
- Water dispersion
- 15% (w/v)
- Organic compatibility
- No extra thickeners
Redoxme
Price: On Request
Anion Exchange Membrane 20 mm dia. (pack of 100)
BEC 50 mL - Basic Electrochemical Cell
BMM EC 15 mL - Bottom Magnetic Mount Electrochemical Cell
Boron-Doped Diamond on Silicon Substrate
- BDD thin film on Si wafer
- Affordable BDD alternative
- BDD(1)/Si or BDD(2)/Si types
- Sold individually
Carboxymethyl cellulose binder (CMC) - 25 mL
- Water solvent
- 2% (w/v)
- Mw ~400,000
- D.S. = 0.8
Redoxme
Price: On Request
EC H-Cell 2x15 mL- Screw Mount Electrochemical H-Cell
EQCM 14 mm or 25.4 mm dia., 15 mL - Electrochemical Quartz Crystal Microbalance cell
Electrode Adapter Cable - 1mm dia. F to 4 mm dia. banana F/M
- 1 mm to 4 mm banana cable
- Electrode to potentiostat
- Female 1 mm connector
- 300 mm cable length
Redoxme
Price: On Request
Electrode Adapter SGJ to rod-shape electrode
- SGJ 14/15 glass joint fit
- For 6 mm rod electrodes
- Converts glassware to cell
- PEEK chemical resistance
Electrode Polishing Kit
Electrode Polishing Kit
Redoxme
Price: On Request
Electrode adapter – G1 thread (1’’)
- For flat 25×25 mm samples
- Controlled active area
- Low-resistance contact
Electrosynthesis Multiple Reactor Set, A-series
Electrosynthesis Multiple Reactor Set, B-series
- Multi-reactor set (1-6 units)
- B-series reactors + Al block
- Aqueous or organic media
- Hot-plate stirrer compatible
Redoxme
Price: On Request
Electrosynthesis Multiple Reactor Set, C-series
- Multi-reactor set (1–6 units)
- C-series reactors + Al block
- Aqueous or organic media
- CC / CV electrolysis compatible
Redoxme
Price: On Request
Electrosynthesis Multiple Reactor Set, D-series
- Multi-reactor set (1–6 units)
- D-series reactors + Al block
- Aqueous or organic media
- CC / CV electrolysis compatible
Redoxme
Price: On Request
FTO Glass 25/25/1.1 mm - pack of 10
- FTO glass 25x25x1.1 mm
- Resistivity 7-15 ohm/sq
FTO Glass 25/25/2.2 mm - pack of 10
- FTO glass 25x25x2.2 mm
- Resistivity 7-10 ohm/sq
- Transmittance >80%
- Pack of 10 pcs
Redoxme
Price: On Request
Fumasep F-10100 Membrane 20 mm dia. (pack of 100)
- Cation-exchange membrane
- Perfluorinated polymer
- High oxidative stability
- Low resistance membrane
Redoxme
Price: On Request
Fumasep FS-990-PK Membrane 20 mm dia. (pack of 100)
- Cation-exchange membrane
- PEEK-reinforced structure
- High oxidative stability
- Low resistance membrane
Redoxme
Price: On Request
Glass Fiber Membrane 25 mm dia. (pack of 10)
- Borosilicate fiber membrane
- Resin binder for wet strength
- 600 nm pore size barrier
- For H-cell separation
Redoxme
Price: On Request
Glassy (Vitreous) Carbon Substrate - GC 25/25
Glassy (Vitreous) Carbon Substrate - Small Sizes
- Glassy carbon small substrates
- Sizes 5x5 to 20x20 mm sq
- Reusable, corrosion resistant
- Sold individually
Redoxme
Price: On Request
Graphite Plate - Synthetic, Vibration Molded - pack of 10
- Synthetic polycrystalline graphite
- Vibration-molded, low resistivity
Graphite rod electrode - GR 6/70 mm
High-Pressure Ag/AgCl Reference Electrode - 6/75 mm
High-Pressure Wire Counter Electrode - HP90HX15 0.6/290 mm
- High-pressure counter wire
- Operates up to 50 bar
- Helical wire geometry
- PEEK body insulation
ITO Glass - pack of 10
- ITO glass 25x25x1.1 mm
- Resistivity 8-12 ohm/sq
- ITO layer 120-160 nm
- Pack of 10 pcs
Redoxme
Price: On Request
Kapton (PI) window - 25 mm dia., 75 um thick, pack of 20 pcs
- Kapton polyimide window
- High X-ray transmission
- High thermal stability
- Radiation damage resistant
Redoxme
Price: On Request
LUER-LOCK syringe to 1/16 inch OD tube adapter
- Luer-Lock syringe interface
- For 1/16" OD tubing
- Leak-free fluid connection
- For pumps or manual fil
Redoxme
Price: On Request
MM EC H-Cell 2x15 mL- Magnetic Mount Electrochemical H-Cell
MM PEC 15 mL double-sided – Magnetic Mount Photo-electrochemical Cell
MM PEC 15 mL single-sided – Magnetic Mount Photo-electrochemical Cell
- Magnetic mount, single-sided
- Single compartment, PEEK body
Metal Plate Electrode - set of 10
- Polycrystalline metal plate
- 4 sizes: 7, 10, 15, 25 mm sq
- 10 materials available
- Pack of 10 pcs
Redoxme
Price: On Request
Metal Water Jacket for Temperature Control, 50 mL chamber
- Water-jacket temperature
- For 50 mL EC cells
- Fast heat transfer metal
- Thermostat loop compatible
Metal Wire Auxiliary Electrode - 35HX15 0.6/235 mm
- Helical wire counter
- Pt or Au wire options
- Fits low-volume cells
- 0.6 mm wire diameter
Metal Wire Auxiliary Electrode - 50HX15 0.6/250 mm
- Helical wire counter
- Pt or Au wire options
- Large surface area coil
- 0.6 mm wire diameter
Redoxme
Price: On Request
Metal Wire Auxiliary Electrode - ST 0.6/150
- Straight wire counter
- 0.6 mm wire diameter
- 130 mm active length
- Pt or Au wire options
Redoxme
Price: On Request
Metal Wire Auxiliary Electrode - ST 0.6/custom
- Custom wire length options
- 0.6 mm wire diameter
- Pt or Au wire options
- PEEK plug with O-ring
Redoxme
Price: On Request
MicroVacuum EQCM Cell for QSH-Dip sensor holder
Multiport PEC 15 mL single-sided – Multiport Photo-electrochemical Cell
Noble Metal Plate - platinum, gold, palladium
- High-purity noble metal plate
- Pt, Au or Pd material
- Up to 25 x 25 mm size
- Sold individually
Redoxme
Price: On Request
PEC 15 mL double-sided – Photo-electrochemical Cell
PEC 15 mL single-sided – Photo-electrochemical Cell
- Screw mount, single-sided
- Single compartment, PEEK body
PEC 15mm x 15mm - Photo-electrochemical Cell
PEC 7mm x 7mm - Photo-electrochemical Cell
PEC H-Cell 2x15 mL – Photo-Electrochemical H-Cell
- Horizontal H-Cell, 2x15 mL
- Double compartment, PEEK body
- Membrane-separated chambers
PTFE Liner (Replacement for Parr Instrument)
- 125 mL PTFE liner
- For Parr 4744 vessels
- For Parr 4748 vessels
- Cup + PTFE cover included
Redoxme
Price: On Request
PTFE-coated Aluminum Block
- Dry-bath reactor heating
- PTFE chemical resistance
- High thermal conductivity
- Hotplate compatible
Redoxme
Price: On Request
Peristaltic pump, model A, 0.07 - 380 mL per min
Platinum Gauze Electrode - OD: 23 mm, H: 20 mm
- Pt gauze counter electrode
- High surface area mesh
- For high current studies
- 99.9% platinum mesh
Redoxme
Price: On Request
Plug 6/20 mm
- Seals unused cell ports
- Fits >6 mm electrode ports
- 20 mm plug length
- PEEK / PTFE materials
Redoxme
Price: On Request
Plug for High-Pressure Cells - 6/30/47 mm
- Seals HP cell ports
- For 6 mm Swagelok fittings
- 30 mm effective length
- PEEK chemical resistance
Redoxme
Price: On Request
Poly(acrylic acid) binder (PAA) - 25 mL
- Water solvent
- 2% (w/v)
- Organic electrolyte compatible
- Poly(acrylic acid) binder
Redoxme
Price: On Request
Poly(tetrafluoroethylene) binder (PTFE) - 25 mL
- Water emulsion
- 60% (w/v)
- Organic & aqueous compatible
- Free-standing electrodes
Redoxme
Price: On Request
Poly(vinylidene fluoride) binder (PVDF) - 25 mL
- 5% (w/v)
- NMP solvent
- Mw ~1,000,000
- Organic & aqueous compatible
Redoxme
Price: On Request
Polyurethane binder (PU) - 25 mL
- Water emulsion
- 40% (w/v)
- Organic & aqueous compatible
- High temp resistance
Redoxme
Price: On Request
Proton Exchange Membrane (pack of 100)
- Nafion PEM membranes
- 20 mm round diameter
- Pack of 100 membranes
- Multiple thickness options
QCM EC BL 15 mL - Quartz Crystal Microbalance Electrochemical cell
Quartz Crystal Microbalance Electrochemical cell - SRS QCM200 EC 15 mL
- QCM EC for SRS QCM200
Quartz Fiber Membrane 25 mm dia. (pack of 10)
- Pure silica fiber membrane
- Binder-free composition
- Pre-fired at 1000 °C
- For H-cell separation
Redoxme
Price: On Request
Reticulated Glassy (Vitreous) Carbon electrode - OD: 30mm, ID: 20mm, H: 25mm, Pt wire 0.6/60mm
S Rack 25 mL - Substrate Rack for 25 mL beaker
- Holds up to 6 substrates
- Fits standard 25 mL beaker
- PTFE chemical resistance
- Ideal for substrate cleaning
Soda-Lime Glass Substrate – pack of 100
- Soda-lime glass substrate
- Smooth flat surface
- For film deposition
- 25x25x1.1 mm substrates
Redoxme
Price: On Request
Soil Silver / Silver Chloride Reference Electrode - Soil Ag/AgCl
- Ag/AgCl reference electrode
- Designed for soil insertion
- Chemical-resistant PEEK body
- Plant electrophysiology use
Redoxme
Price: On Request
Spiral Wire Electrode - 50SP17 0.6/191 mm
- Spiral wire geometry
- High surface area design
- For electrochemical etching
- Multiple metal options
Redoxme
Price: On Request
Styrene-butadiene copolymer (SBR) - 25 mL
- Water emulsion
- 50% (w/v)
- Organic compatibility
- High flexibility
Redoxme
Price: On Request
Working Disk Electrode - PEEK body 6 mm dia., 20 mm long
- Standard disk electrode
- PEEK chemical-resistant body
- Multiple disk materials
Working Disk Electrode - PEEK body 6 mm dia., 70 mm long
- 2, 3, 4 or 5 mm disk
- PEEK chemically resistant
