Search products

• High-Quality Gold Material.
• Covered with PTFE Body.
• Mostly used as a WE
• Gold-coated connecting rod.

• Max current: ±100 mA
• EIS capability included
• Applied potential: ±5 V
• Compliance voltage: ±17.5 V

• Ag/AgNO3 0.1M acetonitrile
• Glass body
• 12mm body dia.
• 0 °C to 80 °C

• Ø1x4mm Pt wire
• 12 mm glass body dia

Swagelok Cell (T shape) - 2 electrodes 316L SS Ø 12.7 mm

• Ti working electrode
• Active area: 2 mm dia disk

• Cylindrical Pt coil 99.95% Pure
• Mounted at Teflon end.
• Mostly used as a WE or CE.
• Gold-coated connecting rod.

• Voltage ± 10V max
• Compliance Voltage ± 45V max
• Current ± 1A max

• Saturated calomel electrode
• Refillable
• Body diameter: 9 mm
• Total length: 145 mm

• Water jacket
• 4 Necks (3 B14, B14 & 1 B19)
• Material: Borosilicate Glass
• Volume: 100 mL

• Graphite rod CE
• Body diameter: 4 mm
• Total length: 150 mm

• EIS: 10 µHz to 100 kHz
• Compliance voltage ± 13 V
• CE, RE, WE, WE-SENSE

• 4-port cell usually for corrosion study.
• Salt bridge and gas inlet/outlet
• Rubber stoppers to stabilize the electrodes.

• Handheld & Portable
• Applied Potential Range: ±2.4 V
• Max Current Range: 100 mA
• USB Communication

• Voltage control range: ± 10V
• EIS frequency range: 10μHz~1MHz
• Max, current output: ± 1A
• Bi-potentiostat

• Pressure frame for studying solid-state electrolytes and solid-state batteries under pressure

• 6 positions holding plate
• Glass cells with cap
• Two ports per reactor

• Current range: ±5 A max
• Voltage scan range: ±10 V

• Freq. range: 100 mHz to 10 MHz
• Extendable to 40 MHz
• 1 mΩ to 1 TΩ
• Up to 256 ports

• Characterization of coatings
• 3-electrode configuration
• Large surfaces
• 50 mm or 75 mm internal dia

• Length: 120 mm
• Electrolyte: saturated K2SO4
• Connector: screw head type S7
• Grinded: Yes

• Wire 1mm
• Length: 120mm
• Higher diameter: 12mm
• Lower diameter: 8mm

Cell Assembly & Sealing System

Battery Holder for super capacitor

• Silver WE
• Active area: 3 mm disk
• Body diameter: 6 mm
• Body material: PEEK

• 5% (w/v)
• NMP solvent
• Mw ~1,000,000
• Organic & aqueous compatible

• Pure silica fiber membrane
• Binder-free composition
• Pre-fired at 1000 °C
• For H-cell separation

• Gold WE and CE, AgCl RE
• 2 mm WE on FR4 substrate
• Thiol-functionalizable
• Reusable and recyclable

• 50 wt% metal loading
• PtCo/C on carbon black
• PEM fuel cell catalyst

• Na metal foil
• µm to mm thickness
• High-purity research
• Custom dimensions

• Thin 26–34 µm profile
• <0.5 Ω cm² resistance
• Vanadium & organic RFB

• Precision die cutting
• Cell-specific formats
• Custom dies available